HKD sealing systems by DOYMA
As a specialist in sealing systems, we have various ranges in our portfolio. The products of the HKD range can of course also be combined with the DOYMA Curaflex® products. In particular, the Curaflex® wall sleeves and the extensive accessories are available here. Should you require advice on a specific application, our advisory team is available to you during our service hours in the chat, as well as by phone at: 0049 4207 - 91 66 550 and by email at export@doyma.de.
Sealing systems KE-pipe sleeves KG elements KG2000 elements Others
Sealing systems
The HKD DOMO-V models can be variably adjusted to the diameter of the pipe or cable. One HKD DOMO-V type can therefore replace up to 10 standard sizes. The HKD DOMO-VT type is hinged for use on pipes that have already been installed.It is adapted to the relevant diameter by simply removing the rubber elements that are not required.
HKD KE-pipe sleeves
- Keyed surface for better connection between the pipe sleeve and concrete
- Sealing system on both sides with movable SBR lip seals
- The inner diameter matches the nominal diameter DN
- High dimensional stability
- Lightweight, impact-resistant plastic
- Gas-tight
- Can be used in twin/element walls
- Lengths: 200–500 mm
- Closed on both sides with plastic safety cover
- Keyed surface for better connection between the pipe sleeve and concrete
- Sealing system on both sides with movable SBR lip seals
- Bonding flange for the on-site application of a thick coating (PMBC/KMB) with pressing water (W2.1-E)
- Bonding flange for the on-site application of a mineral sealing slurry (MDS) or a liquid plastic (FLK) with non-pressing water (W1-E or W3-E)
- The inner diameter matches the nominal diameter DN
- High dimensional stability
- Lightweight, impact-resistant plastic
- Gas-tight
- Can be used in twin/element walls
- Lengths: 200–500 mm
- Closed on both sides with plastic safety cover
Downloads
[Translate to Dutch:] HKD KE-pipe sleeve with bonding flange data sheet
Download[Translate to Dutch:] Installation instructions
Download[Translate to Dutch:] FHRK certificate HKD KE-pipe sleeve with bonding flange
Download[Translate to Dutch:] Radon-proof HKD KE-pipe sleeve with bonding flange
DownloadKG elements
- KG 2000 sewer pipe as double sleeve with seal element made of EPDM
- Leak-tight against gas and pressing water upon installation in a white tank wal
- KG 2000 sewer pipes in accordance with DIN EN 14758
- Polypropylene solid-walled pipe; more impact-resistant and more abrasion-resistant than KG
- For wall thicknesses of 200–500 mm
- Including installation aids/cover
[Translate to Dutch:] Installation instructions
Download- KG sewer pipe as sleeve with seal element made of EPDM
- Leak-tight against gas and pressing water upon installation in
the floor slab - KG sewer pipes in accordance with DIN EN 13476-2
- Length approx. 500 mm
- Optionally also available with foil flange for connecting moisture barriers in the form of tanking membranes
[Translate to Dutch:] Installation instructions
Download- KG sewer bend with seal element made of EPDM
- Seal element leak-tight against pressing water
- Leak-tight against gas and pressing water upon installation in a white tank floor, if no floor element can be installed due to space constraints.
- KG sewer pipes in accordance with DIN EN 1401
- Bend with 15°/30°/45°/68
[Translate to Dutch:] Installation instructions
Download- KG sewer flange pipe with foil flange for subsequent sealing of KG/HT pipes with tanking membranes or thick coatings
- KG sewer flange pipe is retrofitted into a suitable core bore or cut-out and the foil flange is glued to the wall
- With moulded plug-in sleeve on one side and oil and bitumen-resistant EPDM foil flange; diameter of foil flange 430–520 mm
- Length approx. 500 mm
- KG sewer pipes in accordance with DIN EN 13476-2
[Translate to Dutch:] Installation instructions
Download- KG sewer plug-in flange for subsequent sealing of already cast-in KG sewer wall elements for sealing with tanking membranes or thick coatings
- With moulded plug-in sleeve on one side and oil and bitumen-resistant EPDM foil flange; diameter of foil flange 430–520 mm.
- KG sewer pipes in accordance with DIN EN 1401
KG2000 elements
- KG 2000 sewer pipe as double sleeve with seal element made of EPDM
- Leak-tight against gas and pressing water upon installation in a white tank wall
- KG 2000 sewer pipes in accordance with DIN EN 14758
- Polypropylene solid-walled pipe; more impact-resistant and more abrasion-resistant than KG
- For wall thicknesses of 200–500 mm
- Including installation aids/cover
[Translate to Dutch:] Installation instructions
Download- KG 2000 sewer pipe as double sleeve with seal element made of EPDM
- Leak-tight against gas and pressing water upon installation in the floor slab
- KG 2000 sewer pipes in accordance with DIN EN 14758
- Polypropylene solid-walled pipe; more impact-resistant and more abrasion-resistant than KG
- Length approx. 500 mm
- Optionally also available with foil flange for connecting moisture barriers in the form of tanking membranes
[Translate to Dutch:] Installation instructions
Download- KG 2000 sewer bend with seal element made of EPDM
- Seal element leak-tight against gas and pressing water
- Polypropylene solid-walled pipe; more impact-resistant and more abrasion-resistant than KG
- KG 2000 sewer pipes in accordance with DIN EN 14758
- Leak-tight upon installation in a white tank floor, if no floor element can be installed due to space constraints
- Bend with 15°/30°/45°/68°
[Translate to Dutch:] Installation instructions
Download- KG 2000 sewer double sleeve with seal element made of EPDM
- Seal element leak-tight against gas and pressing water
- Polypropylene solid-walled pipe; more impact-resistant and more abrasion-resistant than KG
- KG 2000 sewer pipes in accordance with DIN EN 14758
- For use in pump sumps or light wells
- Ideal for thin-walled components
- KG sewer flange pipe with foil flange for subsequent sealing of KG/HT pipes with tanking membranes or thick coatings
- KG sewer flange pipe is retrofitted into a suitable core bore or cut-out and the foil flange is glued to the wall
- With moulded plug-in sleeve on one side and oil and bitumen-resistant EPDM foil flange; diameter of foil flange 430–520 mm
- Length approx. 500 mm
- KG 2000 sewer pipes in accordance with DIN EN 14758
[Translate to Dutch:] Installation instructions
Download- KG sewer plug-in flange for subsequent sealing of already cast-in KG sewer wall elements for sealing with tanking membranes or thick coatings
- With moulded plug-in sleeve on one side and oil and bitumen-resistant EPDM foil flange; diameter of foil flange 430–520 mm
- G 2000 sewer pipes in accordance with DIN EN 14758
[Translate to Dutch:] Installation instructions
DownloadOthers
HKD floor drain with wall collar for connecting DN 100 KG/KG 2000 sewer pipes and DN 50 pipes.
Additional accessories:
- Stainless steel grating
- Extensions piece
- Extensions of stacking frame
- APP-PU 50